These directions apply to establishing Arlo cameras with Arlo base channels. Should you sync with Arlo Pro two or Arlo cameras using an Arlo base channel, you may still utilize the attributes, such as rechargeable batteries, 2-way sound, AC power usage, and advanced motion detection.

Notice : Cameras have to be synced at one time.

To Establish and sync Arlo cameras:

Open the battery compartment by pressing the latch and pulling back softly.
Add the battery as shown and close the door.
Bring the camera inside a few feet (30 to 100 centimeters) of this bottom channel.
Sync the camera into the bottom channel:
if you’re utilizing an Arlo base channel, press on the Sync button on the face of the bottom station for approximately two seconds then release the button.
Notice : If you press on the Sync button at the Arlo base channel for a long time, the LED beneath the USB symbol blinks amber for 10 minutes. Even though the USB LED is blinking amber, the sync method is blocked.
If you’re utilizing an Arlo base channel, press the button towards the cover of the base channel for approximately two seconds then release the button.
Await the sync status LED to blink green.
Press that the Sync button in addition to the camera for approximately two seconds and then release the button.

A blue LED on the camera blinks quickly to validate sync.

If the LED on the camera blinks amber, the sync isn’t profitable. You have to replicate the sync procedure.
Assess the camera LED on the bottom channel.
In case the camera LED on the bottom channel turns solid green, then the sync procedure is complete.
Repeat the following steps for every camera.
Notice : In case you don’t finish the sync procedure within 60 seconds, then press the button towards the cover of the base channel and then try again.